Mitre Saws
are the 4th corner solution**
Model 1000
Frame Square builds precision mitre saws with built in accuracy for today’s professional framers and woodworkers. Our mitre saws cut aluminum , wood, MDF or styrene mouldings with micro-precision angles. The guide arms are not adjustable. They are set for 45° at the factory. Optional arms for 22-1/2° are available as well as rabbet offset guides for wide double rabbet mouldings.
Heavy duty clamps are standard to hold all materials safely while cutting and the motion lever controls the table top movement with hands away from saw blade at all times.
Don’t waste time with “do-overs”... do it right the first time with Frame Square.
Model 4200
When picture frame rails are not cut at an accurate 45°, the 4th corner will require more time and effort to join than the other 3 corners combined. Your reputation rests on the 4th corner. Cut it right the first time.
Model 1000 Precision Mitre Saw on floorstand. 10” blade Cuts all types of moulding up to 5” wide and almost 3.5” high.
A ½ HP motor is standard and a 1 HP motor is optional.
Top measure stop allows for pre-cutting rails to length without swinging long pieces of moulding.
A ½ HP motor is standard and a 1 HP motor is optional.
Top measure stop allows for pre-cutting rails to length without swinging long pieces of moulding.
**
Models 4000 & 4200 Precision Mitre Saws cut “with the grain” for superior cuts on wood. Triple chip 10” or 12” blades cut all type of moulding up to 6” wide and almost 4.5” high. ½ HP motor is standard on 10” saw (Bench Model 4000 ) & 1 HP motor is standard on 12 “ (Floor Model 4200). A scrap support keeps the end cuts clean and a marking gauge allows for pre-cutting rails to length without swinging long pieces of moulding.
Model 4000